❞ كتاب Prosthodontics and dental Materials ❝

❞ كتاب Prosthodontics and dental Materials ❝

13.proshodontics and dental Materials


1. Module: Faculty Teaching Guide for Dental Materials Module - Prosthodontics -1- 1
2. Faculty Teaching Guide for Dental Materials Faculty Teaching Guide for Dental Materials Module: Prosthodontics Review of Previous Module Review topics from the previous module to confirm understanding prior to presenting new material. Module Overview Prosthodontics is the specialty concerned with replacement of teeth and missing or deformed oral structures. The accuracy of crowns, inlays, bridges, or dentures, and therefore the dental health of the patient, depends on the physical properties of the materials involved. The success of these prosthesis also rests with dental personnel who manipulate the materials and equipment during the process of creating the prosthesis. Dental laboratory technicians are partners with dental office personnel in the endeavor for maximum service for the patient. Strict attention to detail, and knowledge of materials used, are essential for dental assistants in order to aid in this process of fabricating oral structures. The Big Picture Faculty Teaching Guide for Dental Materials Module: Prosthodontics Section 1: Section 2: Fixed Removable Prosthodontics Prosthodontics Part A: Types of Fixed Part A: Removable Prosthetics Partial Dentures Part B: Fixed Part B: Removable Prostheses Procedures Complete Dentures Resources This module utilizes the following learner resources: Textbooks: Dental Assisting, A Comprehensive Approach, 2nd edition, by Donna J. Phinney and Judy Halstead. Delmar Learning, 2004. ISBN 1-4018-3480-9. 2
3. Module: Prosthodontics Materials and Procedures for Today’s Dental Assistant, by Ellen Dietz, Delmar Learning, 2004. ISBN 1-4018-3733-6. Workbook: Workbook to Accompany Dental Assisting, A Comprehensive Approach, 2nd edition, by Donna J. Phinney and Judy Halstead, prepared by Karen L. Waide, Delmar Learning, 2004. ISBN 1-4018-3483-3. Instructor’s Manual: Instructor’s Manual to Accompany Delmar’s Dental Assisting, A Comprehensive Approach, 2nd edition, by Donna J. Phinney and Judy Halstead. Delmar Learning, 2004. ISBN 1-4018-3482-5. Electronic CD-ROM: Delmar’s Dental Assisting Interactive Skills and Procedures CD-ROM, ISBN 1-4018-3485- X. Faculty CD-ROM: The faculty CD-ROM includes this Faculty Guide the PowerPoint Presentation for Dental Materials. Additional Resources Safety Standards and Infection Control for Dental Assistants, by Ellen Dietz. Delmar Learning, 2002. ISBN 0-7668-2659-7. Electronic Classroom Manager to Accompany Delamr’s Dental Assisting, A Comprehensive Approach, 2nd edition, by Donna J. Phinney and Judy Halstead. Delmar Learning, 2004. ISBN: 1-4018-3484-1. Section 1: Fixed Prosthodontics Section Overview A fixed prosthesis is cemented permanently in place in the patient’s mouth, and if cared for properly by the patient, is designed to last a lifetime. It is a restoration that replaces missing tooth structure, improves mastication, prevents drifting of teeth, and promotes better oral health. The dental assistant’s meticulous responsibilities at each phase of the procedure contribute to the success of the final product. There are many steps involved and each one is vital to the ideal end result. Outline of Section 1 Part A: Types of Fixed Prosthetics Part B: Fixed Prostheses Procedures Learning Objectives and Competencies These learning activities directly address the Learning Objectives and competencies as stated. -3- 3

-
من كتب طب الأسنان - مكتبة كتب الطب.

نبذة عن الكتاب:
Prosthodontics and dental Materials

13.proshodontics and dental Materials


1. Module: Faculty Teaching Guide for Dental Materials Module - Prosthodontics -1- 1
2. Faculty Teaching Guide for Dental Materials Faculty Teaching Guide for Dental Materials Module: Prosthodontics Review of Previous Module Review topics from the previous module to confirm understanding prior to presenting new material. Module Overview Prosthodontics is the specialty concerned with replacement of teeth and missing or deformed oral structures. The accuracy of crowns, inlays, bridges, or dentures, and therefore the dental health of the patient, depends on the physical properties of the materials involved. The success of these prosthesis also rests with dental personnel who manipulate the materials and equipment during the process of creating the prosthesis. Dental laboratory technicians are partners with dental office personnel in the endeavor for maximum service for the patient. Strict attention to detail, and knowledge of materials used, are essential for dental assistants in order to aid in this process of fabricating oral structures. The Big Picture Faculty Teaching Guide for Dental Materials Module: Prosthodontics Section 1: Section 2: Fixed Removable Prosthodontics Prosthodontics Part A: Types of Fixed Part A: Removable Prosthetics Partial Dentures Part B: Fixed Part B: Removable Prostheses Procedures Complete Dentures Resources This module utilizes the following learner resources: Textbooks: Dental Assisting, A Comprehensive Approach, 2nd edition, by Donna J. Phinney and Judy Halstead. Delmar Learning, 2004. ISBN 1-4018-3480-9. 2
3. Module: Prosthodontics Materials and Procedures for Today’s Dental Assistant, by Ellen Dietz, Delmar Learning, 2004. ISBN 1-4018-3733-6. Workbook: Workbook to Accompany Dental Assisting, A Comprehensive Approach, 2nd edition, by Donna J. Phinney and Judy Halstead, prepared by Karen L. Waide, Delmar Learning, 2004. ISBN 1-4018-3483-3. Instructor’s Manual: Instructor’s Manual to Accompany Delmar’s Dental Assisting, A Comprehensive Approach, 2nd edition, by Donna J. Phinney and Judy Halstead. Delmar Learning, 2004. ISBN 1-4018-3482-5. Electronic CD-ROM: Delmar’s Dental Assisting Interactive Skills and Procedures CD-ROM, ISBN 1-4018-3485- X. Faculty CD-ROM: The faculty CD-ROM includes this Faculty Guide the PowerPoint Presentation for Dental Materials. Additional Resources Safety Standards and Infection Control for Dental Assistants, by Ellen Dietz. Delmar Learning, 2002. ISBN 0-7668-2659-7. Electronic Classroom Manager to Accompany Delamr’s Dental Assisting, A Comprehensive Approach, 2nd edition, by Donna J. Phinney and Judy Halstead. Delmar Learning, 2004. ISBN: 1-4018-3484-1. Section 1: Fixed Prosthodontics Section Overview A fixed prosthesis is cemented permanently in place in the patient’s mouth, and if cared for properly by the patient, is designed to last a lifetime. It is a restoration that replaces missing tooth structure, improves mastication, prevents drifting of teeth, and promotes better oral health. The dental assistant’s meticulous responsibilities at each phase of the procedure contribute to the success of the final product. There are many steps involved and each one is vital to the ideal end result. Outline of Section 1 Part A: Types of Fixed Prosthetics Part B: Fixed Prostheses Procedures Learning Objectives and Competencies These learning activities directly address the Learning Objectives and competencies as stated. -3- 3


.
المزيد..

تعليقات القرّاء:

التعويضات السنية التركيبات وتشمل
الجسور الثابتة الجسور الثابتة والزرعات يزرع
الطقوم الكاملة المتحركة الكامل للإزالة أسنان
الطقوم الجزئية المتحركة بدلة جزئية قابلة للإزالة
معالجة و إصلاح الأسنان الجراحي طب الأسنان وتشمل:
تشخيص تسوس الأسنان تسوس التشخيص
الوقايه والحد من انتشار تسوس الاسنان إدارة تسوس الأسنان
تبييض الأسنان Dentalbleaching
تجميل الأسنان طب الأسنان التجميلي
حشوات الأسنان حشوات الأسنان
معالجة لب الأسنان علاج الجذور
معالجة الأسنان المجهرية حشو الأسنان المجهرية
طب الأسنان الوقائي طب الأسنان الوقائي
تقويم الأسنان تقويم الأسنان
جراحة الفم والوجه والفكين جراحة الفم والوجه والفكين
طب أسنان الأطفال طب أسنان الأطفال
أمراض اللثة
علاج الأنسجة المحيطةنان.
زراعة الأسنان. زراعة الأسنان طب
الأسنان
طب الأسنان طب الأسنان الشرعي طب الأسنان الشرعي
طب الفم والطب
أمراض الفم أمراض الفم
أنسجة الفم والسنان Oral Histology علم
السنية مواد
طب الأسنان تشريح الأسنان تشريح الأسنان
مواضيع متعلقة بطب الأسنان
طب الأسنان للرضع
جراحة الأسنان
أسنان
أسنان طقم
طب الاسنان في الاردن
طب الأسنان في جميع انحاء العالم

13.الطب الاسنان ومواد طب الأسنان


1. وحدة: دليل تدريس هيئة التدريس لمواد طب الأسنان وحدة - التعويضات السنية -1-1
.2 دﻟﻴﻞ ﺗﻌﻠﻴﻢ اﻟﻜﻠﻴﺎت ﻟﻜﻠﻴﺔ ﺗﺪرﻳﺲ آﻠﻴﺎت ﻃﺐ اﻷﺳﻨﺎن ﻟﻤﻮاد اﻷﺳﻨﺎن اﻟﻮﺣﺪة اﻟﻨﻤﻮذﺟﻴﺔ: اﻻﺳﺘﻌﺮاض اﻟﺴﺮي ﻣﺮاﺟﻌﺔ اﻟﻤﻮﺿﻮﻋﺎت اﻟﺴﺎﺑﻘﺔ ﻣﺮاﺟﻌﺔ اﻟﻤﻮﺿﻮﻋﺎت ﻣﻦ اﻟﻮﺣﺪة اﻟﺴﺎﺑﻘﺔ ﻟﺘﺄآﻴﺪ اﻟﻔﻬﻢ ﻗﺒﻞ ﺗﻘﺪﻳﻢ ﻣﻮاد ﺟﺪﻳﺪة نظرة عامة على الوحدة النمطية التعويضات السنية هي التخصص المعني باستبدال الأسنان والهياكل الفموية المفقودة أو المشوهة. تعتمد دقة التيجان أو البطانات أو الجسور أو أطقم الأسنان ، وبالتالي صحة الأسنان للمريض ، على الخواص الفيزيائية للمواد المعنية. إن نجاح هذه الأطراف الاصطناعية يقع على عاتق أفراد الأسنان الذين يتلاعبون بالمواد والمعدات أثناء عملية إنشاء الطرف الاصطناعي. فنيين مختبر الأسنان هم شركاء مع موظفي مكتب الأسنان في السعي للحصول على أقصى قدر من الخدمات للمريض. اهتمام صارم بالتفاصيل ومعرفة المواد المستخدمة ، ضرورية لمساعدي الأسنان من أجل المساعدة في هذه العملية من تلفيق الهياكل الفموية. دليل تدريس هيئة تدريس الصور الكبيرة لمواد طب الأسنان الوحدة: التركيبات السنية القسم 1: القسم 2: التركيبات السنية الثابتة القابلة للإزالة التركيبات التركيبية الجزء أ: أنواع الجزء الثابت أ: الأطراف الاصطناعية القابلة للإزالة الأجزاء الجزئية القابلة للإزالة الجزء ب: الجزء الثابت ب: إجراءات الأطراف الاصطناعية القابلة للإزالة أطقم الأسنان الكاملة الموارد هذه الوحدة تستخدم مصادر المتعلم التالية: الكتب المدرسية: المساعدة في طب الأسنان ، نهج شامل ، الطبعة الثانية ، دونا J. Phinney و Judy Halstead. Delmar Learning ، 2004. ISBN 1-4018-3480-9. 2 تركيبات التعويضات السنية الثابتة القابلة للإزالة الجزء أ: أنواع الجزء الثابت أ: الأطراف الاصطناعية القابلة للإزالة الأجزاء الجزئية القابلة للإزالة الجزء ب: الجزء الثابت ب: إجراءات الأطراف الاصطناعية القابلة للإزالة أطقم الأسنان المتكاملة تستخدم هذه الوحدة مصادر المتعلم التالية: الكتب الدراسية: مساعدة الأسنان ، مقاربة شاملة ، الطبعة الثانية ، بقلم دونا ج. فينني وجودي هالستيد. Delmar Learning ، 2004. ISBN 1-4018-3480-9. 2 تركيبات التعويضات السنية الثابتة القابلة للإزالة الجزء أ: أنواع الجزء الثابت أ: الأطراف الاصطناعية القابلة للإزالة الأجزاء الجزئية القابلة للإزالة الجزء ب: الجزء الثابت ب: إجراءات الأطراف الاصطناعية القابلة للإزالة أطقم الأسنان المتكاملة تستخدم هذه الوحدة مصادر المتعلم التالية: الكتب الدراسية: مساعدة الأسنان ، مقاربة شاملة ، الطبعة الثانية ، بقلم دونا ج. فينني وجودي هالستيد. Delmar Learning ، 2004. ISBN 1-4018-3480-9. 2
3. الوحدة: مواد التعويضات السنية وإجراءات مساعد طب الأسنان اليوم ، بقلم إلين ديتز ، دلمار ليرنينج ، 2004. ردمك 1-4018-3733-6. كتاب المصنف: المصاحبة لمصاحبة مساعدة طب الأسنان ، مقاربة شاملة ، الطبعة الثانية ، دونا ج. فينني وجودي هالستيد ، من إعداد كارين إل. وايدي ، دلمار ليرنينغ ، 2004. ردمك 1-4018-3483-3. دليل المعلم: دليل المعلم لمصاحبة دانيمار لمساعدة الأسنان ، ونهج شامل ، الطبعة الثانية ، من قبل دونا جيه Phinney وجودي هالستيد. Delmar Learning ، 2004. ISBN 1-4018-3482-5. القرص المضغوط الإلكتروني: أداة مساعدة ديلمار للأسنان وإجراءاتها التفاعلية CD-ROM ، ISBN 1-4018-3485- X. قرص CD-ROM الخاص بالكلية: يحتوي القرص المضغوط للكلية على دليل الكلية هذا وهو عرض PowerPoint التقديمي لمواد طب الأسنان. الموارد الإضافية معايير السلامة ومكافحة العدوى لمساعدي طب الأسنان ، من قبل إلين ديتز. Delmar Learning ، 2002. ISBN 0-7668-2659-7. مدير الفصول الإلكترونية لمرافقة مساعد الأسنان في Delamr ، مقاربة شاملة ، الطبعة الثانية ، دونا J. Phinney و Judy Halstead. Delmar Learning ، 2004. ISBN: 1-4018-3484-1. القسم 1: قسم التعويضات السنية الثابتة نظرة عامة يتم تثبيت طرف ثابت في مكانه بشكل دائم في فم المريض ، وإذا تم تصميمه بشكل صحيح من قبل المريض ، فقد تم تصميمه ليعيش مدى الحياة. هو ترميم يستبدل بنية الأسنان المفقودة ، ويحسن المضغ ، ويمنع انجراف الأسنان ، ويعزز صحة الفم بشكل أفضل. والمسؤوليات الدقيقة لمساعد الأسنان في كل مرحلة من مراحل العملية تساهم في نجاح المنتج النهائي. هناك العديد من الخطوات المعنية وكل منها أمر حيوي للنتيجة النهائية المثالية. الخطوط العريضة للقسم 1 الجزء أ: أنواع الأطراف الاصطناعية الثابتة الجزء ب: إجراءات التعويضية الثابتة أهداف التعلم وكفاءاته تتعامل أنشطة التعلم هذه مباشرة مع أهداف التعلم وكفاءاته كما هو مذكور. -3- 3

مواد طب الأسنان التصالحيةالمتجربة عجائن مواد طب الأسنان ومواد التطبيقات في طب الأسنان


تصنيف. استناداً إلى سلوكها الحراري ، يمكن تقسيمها إلى بوليميرات حرارية بالحرارة اعتمادا على ما إذا كانت تنعيم عند تسخينها. مجموعة ثالثة من المواد البوليمرية هي اللدائن. www.indiandentalacademy.com
26. MMethyl Methacrylate MMethyl methacrylate is a transparent liquid at room temperature with  the following physical properties: •        Molecular weight = 100 •        Melting point = —48° C •        Boiling point = 100.8° C  •        Density = 0.945 g/mL at 20° C •        Heat of polymerization =12.9 kcal/mol MMethyl methacrylate exhibits a high vapor pressure and is an excellent  organic solvent. Although the polymerization of methyl methacrylate can  be  initiated  by  visible  light,  ultraviolet  light,  or  heat,  it  is  commonly  polymerized in dentistry by the use of a chemical initiator,  A A volume shrinkage of 21% occurs during the polymerization of the  pure methyl methacrylate monomer  . www.indiandentalacademy.com
27.                   Poly(methyl Methacrylate) Poly(methyl methacrylate) is a transparent resin of remarkable  clarity; it transmits light in the ultraviolet range to a wavelength of  250 nm. It is a hard resin with a Knoop hardness number of 18 to 20.  It has a tensile strength approx-imately 60 MPa, a density of 1.19   g/cm3 ,  and  a  modulus  of elasticity of approximately 2400 MPa. It is chemically stable to heat and softens at 125° C, and it can be  molded as a thermoplastic material. Between 125° and 200° C,  depolymerization takes place. At approximately 450° C, 90% of  the polymer depolymerizes to form the monomer www.indiandentalacademy.com
28. Amalgam: its an alloy of mercury with other metals. Silver amalgam has a silvery grey metallic appearance and mainly used for posterior restorations. Amalgam www.indiandentalacademy.com
29. Classification of amalgam alloys 1.According to particle shape a.Spherical shaped b.Irregular surface spheres (spheroidal shaped) c. Non-spherical – irregular shaped (Lathe cut) d.Dispersed (spherical + lathe cut) 1.According to particle size a.Micro cut (less than 25μ) b.Fine cut (less than 35μ) c. Coarse cut www.indiandentalacademy.com
30. 3.According to dispensing a.Powder mercury system b.Pellet mercury system c. Disposable capsules 3.According to composition a.Zinc containing alloys (Zn > 0.01%) b.Zinc free alloys (Zn < 0.01%) c. Pre-amalgamated alloy (Hg = 3%) 3.According to copper content a.Low copper (Cu 0 – 6%) b.High copper admixed (Cu 13%) c. High copper uni-composition (Cu 13-26%)www.indiandentalacademy.com
31. Manipulation Selection of materials Based on clinical requirement of restoration 1.Particle shape and size of the alloy 2.Presence or absence of Zinc 3.Composition as it is related to the elimination of Gamma II phase 4.Physical and mechanical properties 5.Manipulative characters 6.Dispensing system 7.Mercury and its purity www.indiandentalacademy.com
32. Structural component of dental resin based composite 1.Matrix- A plastic resin material that forms a continuous phase and binds the filler particles. 2. Filler- Reinforcing particles and/or fibers that are dispersed in the matrix 3. Coupling agent- Bonding agent that promotes the adhesion between filler and resin matrix 4. Activator-initiation system- required to convert resin paste from a soft moldable filling material to a hard durable restoration 5. Optical Modifiers- help to match colour of tooth structure www.indiandentalacademy.com
33. ACTIVATOR-INITIATOR SYSTEM Both monomethacrylate and dimethacrylate monomers polymerize by the addition polymerization mechanism initiated by free radicals. The free radicals can be generated by chemical activation or by external energy activation (heat, light or microwave). CHEMICALLY ACTIVATED RESINS supplied as two pastes Initiator – benzoyl peroxide Activator – N, N dimethyl –P-toluidine Both the activator and initiator mixed together to form free radicals and addition polymerization reaction is initiated. www.indiandentalacademy.com
34. LIGHT-ACTIVATED RESINS: Light-curable dental composites are supplied as a single paste contained in a light-proof syringe. It contains a photosensitizer and an amine initiator. As long as these two components are not exposed to light, they do not interact. However, exposure to light in the blue region (wavelength of ~468nm) produces an excited state of the photosensitizer, which then interacts with the amine to form free radicals that initiate addition polymerization. photosensitizer- Camphorquinone (CQ) Amine initiator-dimethylaminoethyl methacrylate (DMAEMA) www.indiandentalacademy.com
35. DUAL-CURE RESINS: One way to overcome limits on curing depth associated with light curing is to combine chemical curing and visible-light curing components in the same resin. So-called dual-cure resins are commercially available and consist of two light- curable pastes. light curing is promoted by the amine/CQ combination and chemical curing is promoted by the amine/BP interaction. Dual-cure materials are intended for any situation that does not allow sufficient light penetration to produce adequate monomer conversion, for example, cementation of bulky ceramic inlays.www.indiandentalacademy.com
36. CLASSIFICATION OF COMPOSITES: I. Classification given by Skinner: Traditional or conventional composites 8-12 µ.m Small particle filled composites 1-5 µ. m Microfilled composites 0-04 –0.9 µ. m. Hybrid composites 0.6-1 µ. mwww.indiandentalacademy.com
37. VI.GENERATIONS OF COMPOSITE RESTORATION (Marzouk) A. First Generation compositesA. First Generation composites Consist of macro-ceramic reinforcing phase. Has good mechanical properties. Highest surface roughness B. Second Generation compositesB. Second Generation composites Consists of colloidal and micro-ceramic silica. Low strength Unfavourable coefficient of thermal expansion Wear resistance better than first generation Best surface texture.www.indiandentalacademy.com

 

Prosthodontics And Dental Materials
Indira Gandhi Institute of Dental Sciences is well equipped with state of the art Prosthodontics Department under Prof. Dr. Meenu Merry.C.Paul (HOD).The Department has an adequate number of dedicated staff.

Pre Clinical Prosthodontics and Dental Materials
The Preclinical Prosthodontics lab has a seating capacity of 50, and the preclinical Dental Materials lab has 25. There are 50 and 28 burners respectively in each of the above departments to ensure comfortable working environment for students.

Major equipments
Dental Lathe
Hanging motors
Model trimmers
Plaster dispenser
Water heaters
Dewaxing unit
Acrylizing unit
The dedicated and sincere members of this department handle the lecture classes and guide the students in their practical works. The Dental Material lab and Lecture classes are handled by the staff of both Prosthodontics and Conservative Dentistry Department. All the practical works prescribed by the Mahatma Gandhi University are being followed according to the norms. Dental materials & Prosthodontics topics related to the preclinical exercises are also taught simultaneously.

The students are offered around the clock advises related to all topics to ensure that the department produces the most proactive dental students.

Prosthodontics Clinic
The Prosthodontics Clinic is equipped with 17 dental chairs with necessary attachment provisions for airotors and micromotors. Cases carried out in the department

Cast Partial Dentures
Semi flexible Partial Dentures
Acrylic Partial Dentures
Complete Dentures
Metal Ceramic Crowns & bridges
Full metal crowns & bridges
Maxillofacial prosthesis etc.
Equipment and instrument list of both Preclinical Prosthodontics and the Prosthodontics Clinic is attached herewith. Currently, our III BDS (2007 Batch) is undergoing Clinical training in Prosthodontics.

Dental Material Museum


ـ Prosthodontics and dental Materials
تحميل كتاب dental secrets

complete denture pdf

تحميل كتاب endodontics

كتب طب الاسنان باللغة العربية

تحميل كتاب art and science of operative dentistry

مذكرات طب اسنان

تحميل كتب في تقويم الاسنان

تحميل كتاب oral surgery


 

 طب اسنان كتب
كتب طبية باللغة العربية الشعبي
كتب طب اسنان مترجمة
كتب تقويم اسنان بالعربي
كتب طب الاسنان في مصر
كتب طب اسنان بالعربي الشعبي
البسيط في تقويم الأسنان الشعبي
كتب طب اسنان سنة اولى
تحميل كتب في تقويم الاسنان



حجم الكتاب عند التحميل : 28.9 ميجا بايت .
نوع الكتاب : pdf.
عداد القراءة: عدد قراءة Prosthodontics and dental Materials

اذا اعجبك الكتاب فضلاً اضغط على أعجبني
و يمكنك تحميله من هنا:

تحميل Prosthodontics and dental Materials
شكرًا لمساهمتكم

شكراً لمساهمتكم معنا في الإرتقاء بمستوى المكتبة ، يمكنكم االتبليغ عن اخطاء او سوء اختيار للكتب وتصنيفها ومحتواها ، أو كتاب يُمنع نشره ، او محمي بحقوق طبع ونشر ، فضلاً قم بالتبليغ عن الكتاب المُخالف:

برنامج تشغيل ملفات pdfقبل تحميل الكتاب ..
يجب ان يتوفر لديكم برنامج تشغيل وقراءة ملفات pdf
يمكن تحميلة من هنا 'http://get.adobe.com/reader/'